3352mm × 5/8" — straight edge TPI

Application

Synthetic bandsaw blades are designed for cutting foam, rubber, cork, neoprene, and similar compressible materials. At straight edge TPI and 16mm wide, this synthetic bandsaw blade is suited to thick block foam, rubber sheet, and cork where fast, clean separation is the goal. The bandsaw blade geometry prevents the tearing and compression-cut problems that occur when using conventional blades on these materials.

Bandsaw Blade Width: 5/8"

A 5/8" bandsaw blade is a step up in rigidity — suited to straight ripping, light resawing, and cutting thick sections where a narrower bandsaw blade would deflect. Ideal for floor-standing saws with adequate wheel diameter, offering excellent cut quality on through-cuts.

TPI: straight edge TPI

straight edge TPI — suitable for a wide range of cutting applications.

Keep at least 3 teeth in contact with the workpiece at all times for efficient cutting and to avoid stripping tooth tips. For thin-wall or variable-section material, variable-pitch bandsaw blades reduce harmonic vibration and extend bandsaw blade life.

Bandsaw Blade Length: 3352mm

At 3352mm, this is a large bandsaw blade typically found on heavy-duty industrial bandsaws used in timber yards, sawmills, and metal fabrication shops. If you are unsure of your bandsaw blade length, measure the existing blade end-to-end before it is looped.

If your saw requires a slightly different bandsaw blade length, enter your exact measurement in our configurator — we cut bandsaw blades to any length within our range. The loop length is always measured with the bandsaw blade ends joined as they run on the machine.

How to Order This Bandsaw Blade

Click Add to Basket above to add this exact Synthetic bandsaw blade — 3352mm, 5/8" wide, straight edge TPI — straight to your basket. Need a different bandsaw blade length or specification? Use the bandsaw blade configurator to enter your own exact measurement. We cut every bandsaw blade to order and dispatch with fast UK delivery.